Large format laser engraving machine control system before the main laser seal machine control program, the program uses microcomputer control, and control circuit and drive circuit made of one. Following major issues: engraving speed is low, only up to 200 mm / sec, processing speed is set too high there will be dislocation phenomena; cutting can only use the uniform cutting, generally only up to 20 mm / sec, and prone to a "sawtooth "; the same time, a relatively high repair rate. Does not meet user requirements.

MPC03-LS for the laser industry, the particularity of applications, optimized software and hardware configuration, greatly increased the output of laser processing equipment, speed and output quality. Meanwhile, in order to facilitate equipment manufacturers high performance products as soon as possible, in-depth study of laser engraving machine processing technology and features, based on our control card based on the MPC03-LS has developed a complete control system, the system main functions are:
A, supports BMP, PLT, DXF, DST (Tajima embroidery software), and other graphic image data format.

C, output data can be layered for each layer can be individually defined output power, output speed, output sequence, the output type (engraving / cutting), and the definition of parameters of each layer is automatically saved.

D, image can be engraved on the vector for drawing lines, cutting and engraving, carving precision can be set.
B, the system transferred to graphics, image data, can be a simple layout editor (such as scaling, rotation, etc.).
E, to support the array output, immediately (fixed) output, analog output.
F, the output can be "suspended," "continue," "manual position", all the output control operations can be directly received the Control Panel on the operation of equipment, easy to operate.
G, the output from time to time "walking frame" function, convenient place to find leaks.
H, engraving speed of up to 1500mm / s, cutting speed can reach 220mm / s, carving precision can reach 0.1mm.
Laser processing equipment manufacturers only need to use the software and the MPC03-LS control card can produce high-performance laser engraving machine cutting equipment, greatly reducing the development cycle of new products, greatly improved the equipment manufacturer's market competitiveness.